× HOME (current) ROOFING IRON
POLYCARBONATE INSULATION
SELECT STATE:
1300 886 944 LOGIN 0

               

 

  • 0

Cart296138

Item removed. Undo

Where are you shopping for today?

Delivery State:

Please note: item availability may change.
COLORBOND Dominion Cladding Photo COLORBOND Dominion Cladding COLORBOND Dominion Cladding

Please select a state in the header.


Please select a state in the header.


COLOUR SELECTED:

Dominion 485mm Pan 25mm High .55BMT 

 

Whether used in long lengths running vertically or horizontally on a structure, or in shorter lengths to create a ‘block-like’ effect, DOMINION® cladding makes a strong and extremely stylish statement. With raised panels and recessed ‘express’ joints, this profile conveys a sleek, contemporary character with a pleasing detail created by the shadowed ‘channels’.

 

DOMINION™ cladding is screw-fixed to supports. Engage the overlap leg into the underlap recess, then fix the nominated fastener through both legs into batten or plywood support. When the screw is properly tightened into metal there should be a minimum of three (3) threads protruding past the support being fixed in to. For timber the screw must have a min embedment of 25mm into the timber.

 

Tolerance: 

Sheet length: +/- 7mm
Cover width: +/- 4mm

 

Material Specification: 

COLORBOND® steel is prepainted steel for exterior roofing and walling. It is the most widely used. The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc alloy-coated steel complying with AS 1397:2011. Minimum yield strength for CUSTOM ORB is G550 (550 MPa). Minimum coating mass is AM100 (100 g/m²).

 

 

FASTENING DOMINION™ CLADDING TO SUPPORTS:

DOMINION™ cladding is screw-fixed to supports. Engage the overlap leg into the underlap recess, then fix the nominated fastener through both legs into batten or plywood support. When the screw is properly tightened into metal there should be a minimum of three (3) threads protruding past the support being fixed in to. For timber the screw must have a min embedment of 25mm into the timber.