COLORBOND® Sheerline Gutter Cast Corner EXTERNAL 90º
VIDEO OF COLOURS
Simple rivet and silicone installation
A pre-made external corner for Sheerline COLORBOND® guttering that simply slips into the gutter. Perfect DIY product accessory that will save you time.
Installation - Cut both sides of your gutter at a 45 degree angle. It is a good idea to leave a little bit of a lap on the bottom flat part of the gutter, lapping in the direction of the water flow. But making sure you leave a gap of about 10mm between the two sides of the upright section of the Sheerline gutter. Slide the cast corner into position from underneath. Then finish off with silicone and rivets.
COLORBOND® Sheerline Gutter
COLORBOND® Sheerline Gutter Stopends - PAIR
Sheerline Internal Gutter Clips