Foam Infill Strips for Corrugated Roofing
Profile-cut foam strips that fill the corrugations under ridge capping, barge capping and flashings. Block wind, dust, water and vermin from the roof cavity. Suits COLORBOND® and ZINCALUME® corrugated sheets. Each strip is 915mm long. Sold each.
To order: enter your quantity above, then add to cart. Strips only? Choose postage at checkout, or add them to your sheet order and they ship together.
Product information
How many strips do I need?
Measure the total length of ridge, barge and flashing lines, divide by 0.915, round up. A 10m ridge is 10 ÷ 0.915 = 10.9, so order 11 strips. A ridge needs a strip on both sides, so double it for the ridge run.
Which sheets do these suit?
Corrugated COLORBOND®, ZINCALUME® corrugated and corrugated polycarbonate. The strip is symmetrical, so one product does top and bottom. For other profiles, see TRIMDEK® foam infill or KLIP-LOK® foam infill.
How do I fit them?
Press the strip into the corrugations before the capping or flashing goes on. Fingers or a spatula, no adhesive needed. Butt strips end to end; the capping holds them in place.
Are they fire rated?
No. These strips are not fire retardant. For a bushfire-rated (BAL) build, ask us about the alternatives before you order.
How long does delivery take?
Delivery takes approximately 3 to 7 working days, depending on location.
