COLORBOND® Roofing Screws 12 x 50 Multifix

New

Colorbond® 12 x 50 Multifix Roofing Screws Class 4

More details

Why not consider adding these Accessories below?
Please see our delivery page for shipping charges. Click here

$18.00 18

More info

Purchase painted COLORBOND® Tek Roofing Screws 12 X 50 Multifix Class 4, Self drilling for fixing into timber and metal. 

These roofing screws are fitted with a washer, ensuring the screw will fit snugly against the roofing sheet, allowing for maximum fixing and a water tight seal.

Roof Zip 12 gauge x 50mm Class 4 Tek roofing screws for fixing into timber or steel. 

Don't forget your Hex head Socket drill bit.



How many screws do I need to install a roofing sheet?

We recommend approximately five roofing fasteners per 1 metre sheet.


Winds can create considerable forces on both the upper surface and the underside of metal roofs. To ensure roofs are secure, our 12 x 50 Class 4 screws are recommended for fixing pierced metal sheeting to timber or metal battens.  Self drilling hex head fasteners with neoprene sealing washers are manufactored from high tensile steel with Colorbond durable coatings.  Roofing screws should be driven through square with the surface of the sheeting to provide a complete seal around the screw hole.   

Please do not over tighten the Tek screws, as this can damage the sealing washer and roof sheeting. The ends of corrugated roofing and close pitched trapezoidal roofing sheets should be fixed through the side lap and every second crest after that.


Fixings are intermediate purlins or battens, for corrugated metal roofing should be through the side lap and the third and seventh corrugation from the side lap. For close pitch trapezoidal roofing sheets, fixings should be at every third rib.


A string line should be used to make out a straight line along the centre of the battens or purlins.

Accessories

Customers who bought this product also bought: